• 商务部新闻发言人就美白宫6月18日声明发表谈话 2019-08-19
  • 全国百家网络媒体全媒体记者彭水采风活动 2019-08-18
  • 郭凯敏执导《汤显祖与牡丹亭》开拍在即 2019-08-17
  • 青岛经济学校2018年实习就业双选会供需比17 2019-08-14
  • 《新乌龙院之笑闹江湖》 吴孟达郝劭文时隔24年再聚首 2019-08-14
  • 总书记考察烟台中集来福士都关心了啥? 2019-08-11
  • 网友公园巧遇贾静雯一家 Bo妞成长迅速已经会走路 2019-08-08
  • 安徽:环保督察整改明确年度任务 2019-08-08
  • 【“健”识早知道】“垃圾睡眠”比失眠还可怕?四招助你一夜好眠! 2019-07-26
  • 每逢佳节酒席多,随不起的份子伤不起的面子 2019-07-17
  • 图解:习近平出席博鳌亚洲论坛2018年年会前瞻 2019-07-17
  • 楼面价24390元㎡ 时隔1年滨江再补仓萧山市北东 ——凤凰网房产杭州 2019-07-01
  • 开国上将张宗逊诞辰110周年,深切缅怀他的卓著功勋 2019-07-01
  • 北京市将迎两位新区长 三人拟任区委副书记 2019-06-26
  • 海淀区苏家坨镇举办暨丙申年端午邻里节活动 2019-06-23
  • HN ELECTRONIC

    专业从事电磁式蜂鸣器、压电式蜂鸣器生产及研发

    MLT-4020H

    MLT-4020H

    MLT-4020H

    MLT-4020H

    MLT-4020H

    产品说明

    Specification for Electro-Magnetic Buzzer
         (SMD Type)

     

    Page 2 of 6

    Des.

    Chk.

    Model No.:

    MLT-4020H

    Part No.

     

     

     

      
    1. Technical Parameter

    Measuring condition
           Part shall be measured under a condition (Temperature: 5~35℃, Humidity: 45%~85%R.H., Atmospheric pressure: 860 ~1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ~1060hPa) is regulated to measure.

    1

    Rated Voltage

    3.0Vo-p

    2

    Operating Voltage

    2.0~5.0Vo-p

    3

    Rated Current

    Max.100mA at 4000Hz 50% duty Square Ware 3.0Vo-P

    4

    Sound Output at 10cm

    Min. 75Db,at 4000Hz 50% duty Square Ware 3.0Vo-p

    5

    Coil Resistance

    12±3Ω

    6

    Resonant Frequency

    4000Hz

    7

    Operating Temperature

    -20℃~+70℃

    8

    Store Temperature

    -40℃~+85℃

    9

    Net Weight

    Approx 0.1g

    10

    RoHS

    Yes

    1. Dimensions

    Unit: mm

     

    *Unit: mm; Tolerance: ±0.3mm Except Specified
         *Housing Material: Black LCP
         *Terminal plate: 3 soldering pads, tin Plating Brass

    1. Electrical And Acoustical Measuring Condition

    Recommended Driving Circuit
          
         Resonant frequency, 1/2 duty cycle. Square wave.
         Signal amplitude should be large enough tosaturate
         the transistor.

    Recommended Setting
          

    1. Frequency Response

     
           3.6Vo-p 50% duty Square wave,10cm

    1. Surface mounting condition

    5.1 Reflow soldering
           Recommendable reflow soldering condition is as follows.
            
           Note: (1) In automated mounting of the SMD sound transducers on PCB, any bending, expanding
           and pulling forces or shocks against the SMD sound transducers shall be kept minimum
           to prevent them from electrical failures and mechanical damages of the devices.
           (2) In the reflow soldering, too high soldering temperatures and too large temperature
           Gradient such as rapid heating or cooling may cause electrical failures and mechanical
           damages of the devices.

    1. Reliability Test

    After any following tests the part shall meet specifications without any degradation in
           appearance and performance except SPL. SPL shall not deviate more than -10 dB
           from the initial value

      1. Ordinary Temperature Life Test

    The part shall be subjected to 96 hours at 25±10℃. Input rated voltage
           Resonant frequency, 1/2 duty Square wave.
           6.2 High Temperature Test
           The part shall be capable of with standing a storage temperature of +80℃ for 96 hours.
           6.3 Low Temperature Test 
           The part shall be capable of with standing a storage temperature of -30℃ for 96 hours.

      1. Humidity Test

    Temperature:+40℃±3℃   Relative Humidity:90%~95% Duration: 48 hours
           and expose to room temperature for 6 hours

      1. Temperature Shock Test

    Temperature:60℃ /1hour→ 25℃/3hours→-20℃/1hour→ 25℃/3hours (1cycle)
           Total cycle: 10 cycles

      1. Drop Test

    Standard Packaging From 75cm(Drop on hard wood or board of 5cm thick,
           three sides, six plain.)

      1. Vibration Test

    Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

      1. Reflow Test

    Use recommendable reflow soldering condition (as shown in 5.1)
           (1) No abnormality should be found after reflow
           (2) Good soldering to meet soldering requirements

     

    Note:
           As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.

    1. Packing

     

     


  • 商务部新闻发言人就美白宫6月18日声明发表谈话 2019-08-19
  • 全国百家网络媒体全媒体记者彭水采风活动 2019-08-18
  • 郭凯敏执导《汤显祖与牡丹亭》开拍在即 2019-08-17
  • 青岛经济学校2018年实习就业双选会供需比17 2019-08-14
  • 《新乌龙院之笑闹江湖》 吴孟达郝劭文时隔24年再聚首 2019-08-14
  • 总书记考察烟台中集来福士都关心了啥? 2019-08-11
  • 网友公园巧遇贾静雯一家 Bo妞成长迅速已经会走路 2019-08-08
  • 安徽:环保督察整改明确年度任务 2019-08-08
  • 【“健”识早知道】“垃圾睡眠”比失眠还可怕?四招助你一夜好眠! 2019-07-26
  • 每逢佳节酒席多,随不起的份子伤不起的面子 2019-07-17
  • 图解:习近平出席博鳌亚洲论坛2018年年会前瞻 2019-07-17
  • 楼面价24390元㎡ 时隔1年滨江再补仓萧山市北东 ——凤凰网房产杭州 2019-07-01
  • 开国上将张宗逊诞辰110周年,深切缅怀他的卓著功勋 2019-07-01
  • 北京市将迎两位新区长 三人拟任区委副书记 2019-06-26
  • 海淀区苏家坨镇举办暨丙申年端午邻里节活动 2019-06-23
  • 2019河北快3开奖结果 中国体育彩票返奖率 陕西快乐十分复式投注表 内蒙古快三走势图表 快乐扑克3中奖奖金 电子游戏厅网站 即时比分爱彩网 体育彩票递34期中奖号码 新时时彩1星技巧 香港赛马会有内部资料 广东南粤36选7开奖结果查询 国际赌霸 体彩微信 法甲直播 加拿大卑斯官网开奖