• 6月新规:贩卖公民个人信息将入罪 民用无人机需实名登记 2019-10-10
  • (原创)取消“份子钱”是出租车改革必须迈出的一步 2019-10-10
  • 2018首届“中新广州知识城杯”绘画摄影作文大賽·奥一网 2019-10-05
  • 【学习时刻】清华大学周绍杰:坚定不移地贯彻落实新发展理念 2019-10-01
  • 少女与妈妈每年自拍两次 最后一次让十几万人哭了 2019-10-01
  • 端午女儿节 妍饰小闺女 2019-09-26
  • 房地产就有国家和集体之土地不计价到计价,这笔是经济收入还是财产收入? 2019-09-23
  • “一带一路”建设工作座谈会 2019-09-23
  • 阶级是过去私有制社会的产物,在现代公有制和私有制并存的社会主义社会,阶级已不复存,存在的是阶层。 2019-09-19
  • 共产党新闻网—资料中心—历次党代会 2019-09-12
  • 阿富汗官方证实巴基斯坦塔利班头目死于美军空袭 2019-09-12
  • 最终的愤怒大屠杀!《绝地求生》最后宣泄自己的怒火 2019-09-08
  • 主持人资料库——崔永元 2019-09-02
  • 滨州市质监局原党组书记、局长高树先被双开 2019-08-31
  • 新华社评论员:厉行法治 常修政德 2019-08-27
  • HN ELECTRONIC

    专业从事电磁式蜂鸣器、压电式蜂鸣器生产及研发

    MLT-13065Y-05

    MLT-13065Y-05

    MLT-13065Y-05

    MLT-13065Y-05

    MLT-13065Y-05

    MLT-13065Y-05

    产品说明

    Specification for Electro-Magnetic Buzzer
         (SMD Type)

     

    Page 4 of 6

    Des.

    Chk.

    Model No.:

    MLT-13065Y-05

    Part No.

     

     

     

    3/19/2018

    3/19/2018

    1. Technical Parameter

    Measuring condition
           Part shall be measured under a condition (Temperature: 5~35℃, Humidity: 45%~85%R.H., Atmospheric pressure: 860 ~1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ~1060hPa) is regulated to measure.

    2

    Operating Voltage

    3-7Vo-p

    3

    Rated Voltage

    5 Vo-p

    4

    Sound Output at 10cm

    Min.85dB,at Rated Voltage at 10cm

    5

    Rated Current

    Max.30mA ,

    6

    Resonant Frequency

    2700±300Hz

    7

    Operating Temperature

    -20℃~+70℃

    8

    Store Temperature

    -30℃~+80℃

    9

    Net Weight

    Approx 1.5g

    10

    RoHS

    Yes

    1. Dimensions

    Unit: mm

     

    *Unit: mm; Tolerance: ±0.3mm Except Specified
         *Housing Material: Black LCP
         *Terminal plate: 2 soldering pads, tin Plating Brass

    1. Electrical And Acoustical Measuring Condition

    Recommended setting
         

    1. Frequency Response

     

    1. Surface mounting condition

    5.1 Reflow soldering
           Recommendable reflow soldering condition is as follows.
            
           Note: (1) In automated mounting of the SMD sound transducers on PCB, any bending, expanding
           and pulling forces or shocks against the SMD sound transducers shall be kept minimum
           to prevent them from electrical failures and mechanical damages of the devices.
           (2) In the reflow soldering, too high soldering temperatures and too large temperature
           Gradient such as rapid heating or cooling may cause electrical failures and mechanical
           damages of the devices.

     

    1. Reliability Test

    After any following tests the part shall meet specifications without any degradation in
           appearance and performance except SPL. SPL shall not deviate more than -10 dB
           from the initial value

      1. Ordinary Temperature Life Test

    The part shall be subjected to 96 hours at 25±10℃. Input rated voltage
           Resonant frequency, 1/2 duty Square wave.
           6.2 High Temperature Test
           The part shall be capable of with standing a storage temperature of +80℃ for 96 hours.
           6.3 Low Temperature Test 
           The part shall be capable of with standing a storage temperature of -30℃ for 96 hours.

      1. Humidity Test

    Temperature:+40℃±3℃   Relative Humidity:90%~95% Duration: 48 hours
           and expose to room temperature for 6 hours

      1. Temperature Shock Test

    Temperature:60℃ /1hour→ 25℃/3hours→-20℃/1hour→ 25℃/3hours (1cycle)
           Total cycle: 10 cycles

      1. Drop Test

    Standard Packaging From 75cm(Drop on hard wood or board of 5cm thick,
           three sides, six plain.)

      1. Vibration Test

    Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

      1. Reflow Test

    Use recommendable reflow soldering condition (as shown in 5.1)
           (1) No abnormality should be found after reflow
           (2) Good soldering to meet soldering requirements

     

    Note:
           As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.

  • 6月新规:贩卖公民个人信息将入罪 民用无人机需实名登记 2019-10-10
  • (原创)取消“份子钱”是出租车改革必须迈出的一步 2019-10-10
  • 2018首届“中新广州知识城杯”绘画摄影作文大賽·奥一网 2019-10-05
  • 【学习时刻】清华大学周绍杰:坚定不移地贯彻落实新发展理念 2019-10-01
  • 少女与妈妈每年自拍两次 最后一次让十几万人哭了 2019-10-01
  • 端午女儿节 妍饰小闺女 2019-09-26
  • 房地产就有国家和集体之土地不计价到计价,这笔是经济收入还是财产收入? 2019-09-23
  • “一带一路”建设工作座谈会 2019-09-23
  • 阶级是过去私有制社会的产物,在现代公有制和私有制并存的社会主义社会,阶级已不复存,存在的是阶层。 2019-09-19
  • 共产党新闻网—资料中心—历次党代会 2019-09-12
  • 阿富汗官方证实巴基斯坦塔利班头目死于美军空袭 2019-09-12
  • 最终的愤怒大屠杀!《绝地求生》最后宣泄自己的怒火 2019-09-08
  • 主持人资料库——崔永元 2019-09-02
  • 滨州市质监局原党组书记、局长高树先被双开 2019-08-31
  • 新华社评论员:厉行法治 常修政德 2019-08-27
  • 宁夏十一选五开奖号码 甘肃快3软件 河内5分彩怎么玩 北京10pk赛车开奖记录 幸运赛车开奖结果官方 试玩pp电子投注平台 竞彩足球历史数据 购彩吧 重庆欢乐生肖怎么玩 今天晚间3d重点胆码 河北快3号码和值推荐号码 陕西快乐10分开奖查询 体彩超级大乐透 黑龙江快乐十分电子走势图带麻将数据 二分pk计划软件