• 阶级是过去私有制社会的产物,在现代公有制和私有制并存的社会主义社会,阶级已不复存,存在的是阶层。 2019-09-19
  • 共产党新闻网—资料中心—历次党代会 2019-09-12
  • 阿富汗官方证实巴基斯坦塔利班头目死于美军空袭 2019-09-12
  • 最终的愤怒大屠杀!《绝地求生》最后宣泄自己的怒火 2019-09-08
  • 主持人资料库——崔永元 2019-09-02
  • 滨州市质监局原党组书记、局长高树先被双开 2019-08-31
  • 新华社评论员:厉行法治 常修政德 2019-08-27
  • 北京冬奥场馆建设注重赛后利用 2019-08-27
  • 为何“最美晚霞”总在暴雨后? 2019-08-23
  • 商务部新闻发言人就美白宫6月18日声明发表谈话 2019-08-19
  • 全国百家网络媒体全媒体记者彭水采风活动 2019-08-18
  • 郭凯敏执导《汤显祖与牡丹亭》开拍在即 2019-08-17
  • 青岛经济学校2018年实习就业双选会供需比17 2019-08-14
  • 《新乌龙院之笑闹江湖》 吴孟达郝劭文时隔24年再聚首 2019-08-14
  • 总书记考察烟台中集来福士都关心了啥? 2019-08-11
  • HN ELECTRONIC

    专业从事电磁式蜂鸣器、压电式蜂鸣器生产及研发

    MLT-9650Y-05

    MLT-9650Y-05

    MLT-9650Y-05

    MLT-9650Y-05

    MLT-9650Y-05

    产品说明

    Specification for Electro-Magnetic Buzzer
         (SMD Type)

     

    Page 2 of 6

    Des.

    Chk.

    Model No.:

    MLT-9650Y-05

    Part No.

     

     

     

    3/19/2018

    3/19/2018

    1. Technical Parameter

    Measuring condition
           Part shall be measured under a condition (Temperature: 5~35℃, Humidity: 45%~85%R.H., Atmospheric pressure: 860 ~1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ~1060hPa) is regulated to measure.

    2

    Operating Voltage

    3-7Vo-p

    3

    Rated Voltage

    5 Vo-p

    4

    Sound Output at 10cm

    Min.85dB,at Rated Voltage at 10cm

    5

    Rated Current

    Max.30mA ,

    6

    Resonant Frequency

    2700±300Hz

    7

    Operating Temperature

    -20℃~+70℃

    8

    Store Temperature

    -30℃~+80℃

    9

    Net Weight

    Approx 1.5g

    10

    RoHS

    Yes

    1. Dimensions

    Unit: mm

     

    *Unit: mm; Tolerance: ±0.3mm Except Specified
         *Housing Material: Black LCP
         *Terminal plate: 2 soldering pads, tin Plating Brass

    1. Electrical And Acoustical Measuring Condition

    Recommended setting
         

    1. Frequency Response

     

    1. Surface mounting condition

    5.1 Reflow soldering
           Recommendable reflow soldering condition is as follows.
            
           Note: (1) In automated mounting of the SMD sound transducers on PCB, any bending, expanding
           and pulling forces or shocks against the SMD sound transducers shall be kept minimum
           to prevent them from electrical failures and mechanical damages of the devices.
           (2) In the reflow soldering, too high soldering temperatures and too large temperature
           Gradient such as rapid heating or cooling may cause electrical failures and mechanical
           damages of the devices.

    1. Reliability Test

    After any following tests the part shall meet specifications without any degradation in
           appearance and performance except SPL. SPL shall not deviate more than -10 dB
           from the initial value

      1. Ordinary Temperature Life Test

    The part shall be subjected to 96 hours at 25±10℃. Input rated voltage
           Resonant frequency, 1/2 duty Square wave.
           6.2 High Temperature Test
           The part shall be capable of with standing a storage temperature of +80℃ for 96 hours.
           6.3 Low Temperature Test 
           The part shall be capable of with standing a storage temperature of -30℃ for 96 hours.

      1. Humidity Test

    Temperature:+40℃±3℃   Relative Humidity:90%~95% Duration: 48 hours
           and expose to room temperature for 6 hours

      1. Temperature Shock Test

    Temperature:60℃ /1hour→ 25℃/3hours→-20℃/1hour→ 25℃/3hours (1cycle)
           Total cycle: 10 cycles

      1. Drop Test

    Standard Packaging From 75cm(Drop on hard wood or board of 5cm thick,
           three sides, six plain.)

      1. Vibration Test

    Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

      1. Reflow Test

    Use recommendable reflow soldering condition (as shown in 5.1)
           (1) No abnormality should be found after reflow
           (2) Good soldering to meet soldering requirements

     

    Note:
           As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.

    1. Packing

     

     

  • 阶级是过去私有制社会的产物,在现代公有制和私有制并存的社会主义社会,阶级已不复存,存在的是阶层。 2019-09-19
  • 共产党新闻网—资料中心—历次党代会 2019-09-12
  • 阿富汗官方证实巴基斯坦塔利班头目死于美军空袭 2019-09-12
  • 最终的愤怒大屠杀!《绝地求生》最后宣泄自己的怒火 2019-09-08
  • 主持人资料库——崔永元 2019-09-02
  • 滨州市质监局原党组书记、局长高树先被双开 2019-08-31
  • 新华社评论员:厉行法治 常修政德 2019-08-27
  • 北京冬奥场馆建设注重赛后利用 2019-08-27
  • 为何“最美晚霞”总在暴雨后? 2019-08-23
  • 商务部新闻发言人就美白宫6月18日声明发表谈话 2019-08-19
  • 全国百家网络媒体全媒体记者彭水采风活动 2019-08-18
  • 郭凯敏执导《汤显祖与牡丹亭》开拍在即 2019-08-17
  • 青岛经济学校2018年实习就业双选会供需比17 2019-08-14
  • 《新乌龙院之笑闹江湖》 吴孟达郝劭文时隔24年再聚首 2019-08-14
  • 总书记考察烟台中集来福士都关心了啥? 2019-08-11
  • 彩票店营销 2019羽毛球最新世界排名 福建36选7开奖直播 彩票平台在线投注快乐时时彩 刮刮乐诀窍 举办电竞比赛赚钱吗 安全靠谱的网上赚钱 万发彩票官方网站 足彩17037推荐分析 27号七星彩 黑龙江22选5开奖结果今天晚上 福彩3d软件官方网站 超神山东十一选五计划软件 上海彩票投注站利润 内蒙古11选5前三直推荐